Steering Lock; Ignition Switch - Quadro 350D Manual

VEHICLE DESCRIPTION VEHICLE DESCRIPTION VEHICLE DESCRIPTION VEHICLE DESCRIPTION VEHICLE DESCRIPTION
38

4.12 STEERING LOCK

4.12 STEERING LOCK 4.12 STEERING LOCK 4.12 STEERING LOCK 4.12 STEERING LOCK
To activate the steering lock, proceed as follows:
- With the handlebar straight, push the parking brake lever «L»
downwards.
- Turn the handlebar «M» fully to the left.
- Push and rotate the ignition key to the «LOCK»
Fig.08_04 Fig.08_04 Fig.08_04
Fig.08_04 Fig.08_04
and remove it.
- The lever remains locked until the steering lock has been disengaged
and the handlebar has been brought to a straight position.
4.13 4.13

IGNITION SWITCH

IGNITION SWITCH
4.13 4.13 4.13 IGNITION SWITCH IGNITION SWITCH IGNITION SWITCH
The ignition switch is located at the centre of the inner leg shield
and is a 5 position key-operated switch. By rotating the key, it is
possible to turn the switch to any of the following positions:
«OFF» «OFF»: the engine cannot be started. «OFF» «OFF» «OFF»
«ON» «ON»: the engine can be started. «ON» «ON» «ON»
«LOCK»: the steering is locked and the engine may not be started. «LOCK» «LOCK» «LOCK» «LOCK»
«ON/S «ON/S «ON/S» seat opening. «ON/S «ON/S
Fig.09_04 Fig.09_04 Fig.09_04 Fig.09_04 Fig.09_04
«ON/C» «ON/C» «ON/C» fuel cap flap opening. «ON/C» «ON/C»
position