Emerson MS9903TT Owner's Manual page 25

MAKING A TAPE RECORDING
This cassette recorder features an Automatic Recording Volume Level Control
System that prevents overloaded or distorted recordings. You can change the
volume level as often as you like during the recording process. It will not have any
effect on the volume level of the recording itself.
1.) Insert a good quality blank tape into DECK A with the exposed tape facing
down and the full reel on the left side. Close DECK A door.
2.) Select the source you wish to record:
PHONO, TUNER, CD or TAPE (Tape Dubbing) and operate that source as you
normally would.
3.) Press the Record
NOTE: When recording from Cassette B to Cassette A you can press the HI-
SPEED DUBBING button to "ON
you to make recordings at approximately twice the normal recording speed.
MS9903TT_082205.p65
key on DECK A to begin recording.
" to select high speed dubbing which allows
24
24 22/8/2005, 16:11