Stereo Headphone Jack - Emerson MS9700 Owner's Manual

MAKING A TAPE RECORDING
This cassette recorder features an Automatic Recording Volume Level Control
System that prevents overloaded or distorted recordings. You can change the
volume level as often as you like during the recording process. It will not have any
effect on the volume level of the recording itself.
1.) Insert a good quality blank tape into the slots on the door with the exposed
tape facing down and the full reel on the left side. Close the door.
2.) Select the source you wish to record – TUNER or CD , and operate that source
as you normally would.
3.) Press the RECORD key on to begin recording.

STEREO HEADPHONE JACK

Connect an optional set of stereo headphones in PHONES jack on front panel for
private listening without disturbing others. Before putting the headphones on your
head reduce the volume to a low level. Then put the headphones on and gradually
increase the volume to a comfortable listening level.
MS9700_ib021903.p65
24
24 19/2/2003, 9:23