Recalling Preset Stations; Changing Preset Stations - Emerson MS3111M Owner's Manual

Recalling Preset Stations

1.) Turn the system ' On' , press the FUNCTION or FUNC. button to select the
Tuner mode, and press the BAND button on front panel or
button on remote control to select the desired band if necessary.
2.) Press the MEMORY UP Button on front panel or M-UP(FOLDER+) button on
remote control repeatedly until the desired Preset Number and Frequency
appear on the display.

Changing Preset Stations

1.) Tune to the new station you want to memorize.
2.) Press the MEMORY(CLK. ADJ.) button on front panel or MEMO(PROG) button
on remote control. The MEMORY indicator appears on the display.
3.) Repeatedly press the MEMORY UP Button on front panel or M-UP(FOLDER+)
button on remote control until the display shows the number of the Preset
Memory you wish to change.
4.) Press the MEMORY(CLK. ADJ.) button on front panel or MEMO(PROG) button
on remote control again. The new station is entered in the memory and the
previous station is deleted.
MS3111M_112306.p65
25
25
(Stop)/BAND
23/11/2006, 10:44