Bass Boost System - Emerson MS9923TT Owner's Manual

PRESET ELECTRONIC EQUALIZER
When the unit is switched ' On' for the first time, the Equalizer will be in the "FLAT"
setting (FLAT Indicator ' On' ). Press "CLASSIC", "POP", or "ROCK" buttons to
change the sound effect to suit your taste. The appropriate EQ Indicator lights to
confirm your selection.

BASS BOOST SYSTEM

• The Bass Boost feature intensifies low frequency sound for richer bass
reproduction.
1.) Press the "BASS BOOST" button once to activate Bass Boost. The "B.B.S."
indicator will light up.
2.) To turn ' Off' the "BASS BOOST" system, press the "BASS BOOST" button
again. The "B.B.S." indicator will go ' Off' .
NOTE:
If you are listening to music with heavy bass at high volume, with EQ set to "ROCK"
and BASS BOOST ' On' , you may experience some distortion. If this occurs, set
the EQ to "FLAT", switch the BASS BOOST ' Off' , or reduce the volume.
MS9923TT_ib_0416.p65
8
8 16/4/2002, 14:17