Emerson MS9923TT Owner's Manual page 12

TO BEGIN CD PLAYBACK
After you have loaded up the 5 CDs in the changer:
1.) Press the PLAY/PAUSE
for the first available disc in the tray and will begin playback from Track 1 on
the first disc.The number of the disc being played flashes on the display. It will
continue playing until it has played all of the discs in the tray and then stops
automatically.
NOTE: To begin playback from a specific disc, press the "CD/DISC SKIP"
button to select the desired disc, and then press the PLAY/PAUSE
Or, press the appropriate disc button ( DISC 1, DISC 2, DISC 3, DISC 4,
DISC 5.) for the disc you wish to start. Playback will begin on Track 1 of the
selected disc. It stops automatically after finished playing all discs.
2.) Adjust the "VOLUME" control ' Up' or ' Down' as desired.
3.) To temporarily stop playback, press the PLAY/PAUSE
II
" " indicator appears in the display. The disc continues to spin, but no sound
is heard. Press the PLAY/PAUSE
resume playback.
4.) To stop playback before the end of a disc, press the STOP
IMPORTANT
If the disc is smudged or scratched it may skip or stop completely. This does not
indicate a problem with the player. If this occurs, try playing another disc. If that
disc plays properly, you may assume that the first disc is damaged and unplayable.
MS9923TT_ib_0416.p65
button to begin playback. The changer will search
button once more to cancel pause and
11
11
button.
button again. The
button.
16/4/2002, 14:17