Icemaker Replacement - Kenmore 795.70332.410 Service Manual

https://appliancetechmanuals.com

3-16 Icemaker replacement

1) Remove the stainless screws marked in the picture
below.
2) Grasp the bottom of motor cover assembly and pull it out
slowly.
3) Disconnect wire harness from wall of compartment.
CAUTION : Make sure that the wire harness shown
below is positioned properly in the clips on the back of
the cover, and taped in place. If this harness is loose it
will not allow the motor housung assembly to fit flush to
the door liner.
In-door
motor
- 12 -