Lexmark Optra Compute 500 User Manual page 17

Set up, install, and configure
4
If necessary, insert headphones or a speaker into the headphone jack.
5
Turn on the device.
Note: The power button light starts blinking, and the indicator lights in the Ethernet port blink, go off, and
then come on again.
6
For Ethernet connection, wait for the indicator light on the right in the Ethernet port to blink rapidly.
7
Depending on your network arrangement, you may need to configure the network before the device can
connect to the portal.
a
Connect the device to a computer through the USB‑C device port to access the Embedded Web Server.
Note: We recommend using a computer running the Windows 10 operating system.
b
Open a web browser, and then type 169.254.76.86 in the address field.
Lexmark Confidential until announced
17