Lexmark Optra Compute 500 User Manual page 12

Set up, install, and configure
5
For Ethernet connection, wait for the indicator light on the right in the Ethernet port to blink rapidly.
6
Depending on your network arrangement, you may need to configure the network before the device can
connect to the portal.
a
Connect the device to a computer through the USB device port to access the Embedded Web Server
(EWS).
Note: We recommend using a computer running the Windows 10 operating system.
b
Open a web browser, and then type 169.254.76.86 in the address field.
c
Click Password, and then enter the device serial number.
Note: The 13‑digit serial number is at the front of Optra Compute 500/550 or on the bottom of Optra
Compute CX1000. The number starts with 8080.
Lexmark Confidential until announced
12