Removing Shipping Hardware; Installing Hole Plugs - Electrolux 134700400 Installation Instructions Manual

8
Unpacking Washer

Removing shipping hardware

Remove all of the following:
1 SHIPPING FORK
5 P CLAMPS

Installing hole plugs

5 P CLAMPS
UNIVERSAL
WRENCH
(SUPPLIED)
5 SPACERS
5 BOLTS
1 SHIPPING FORK
5 SPACERS
Rubber expansion material
on spacers may need time to
relax before they can be easily
pulled through shipping hole.
IMPORTANT
Save all shipping bolts and spacers for future
use. If the washer is to be transported at a later
date, the shipping hardware must be reinstalled
to help prevent shipping damage.
Locate 7 hole plugs in the small bag supplied
with washer instruction guides. Insert them in
the holes in washer back panel.
7 HOLE PLUGS
(IN BAG)
5 BOLTS
NOTE