Introduction - Honeywell FS24X User Manual

FS24X/FS20X DTM Manual, Issue 1

2 Introduction

The purpose of this document is to support the plant operators with commissioning, operation,
configuration and diagnosis of the FS24X/FS20X Rev 1. The FS24X is the latest generation
high technology Multi-Spectrum Triple IR (IR/IR/IR/Visible) Fire and Flame detector and the
FS20X is the latest generation high technology Multi-Spectrum (UV/Dual IR/VIS) Fire and
Flame detector.
The FS24X/FS20X device can be configured and operated by a device type, managed by a
DTM (Device Type Manager) that provides an easy to use user interface for accessing device
variables, configuration parameters and diagnosis information.
The FS24X/FS20X device should have one optional HART module installed to use HART
communication. Please contact Honeywell representatives for the part numbers and availabil-
ity.
The FS24X/FS20X device type offers the combination of FDT and EDDL technologies and a
uniform user interface according to the FDT style guide. It is a full-featured device DTM that
carries the standard EDD-Interpreter components to execute the EDD during runtime. Be-
cause it is using existing device descriptions, plant operators will experience a familiar oper-
ating concept in the DTM.
WARNING
For safety reasons this equipment must be operated by qualified personnel only. Read
and understand the instruction manual completely before operating or servicing the
equipment. For information regarding the FS24X/FS20X device, please check the Tech-
nical Manual (see § )
Every effort has been made to ensure the accuracy of this document, however, Honeywell
Analytics can assume no responsibility for any errors or omissions in this document or their
consequences.
Honeywell Analytics would greatly appreciate being informed of any errors or omissions that
may be found in the content of this document.
For information not covered in this document, or if there is a requirement to send com-
ments/corrections about this document, please contact Honeywell Analytics using the contact
details given on the back page.
Honeywell Analytics reserve the right to change or revise the information supplied in
this document without notice and without obligation to notify any person or organiza-
tion of such revision or change. If information is required that does not appear in this
.
document, contact the local distributor/agent or Honeywell Analytics
1