Safety; Manual Safety Symbols And Important Information; International Symbols; Personal Condition And Safety Equipment - Echo SHRED'N'VAC ES-255 Operator's Manual

s
afeTy

manual safeTy symbols and ImporTanT InformaTIon

Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages pre-
ceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to
you.
DANgER
The safety alert symbol accompanied by the word
"DANGER" calls attention to an act or condition
which WILL lead to serious personal injury or
death if not avoided.
wARNiNg
The safety alert symbol accompanied by the word
"WARNING" calls attention to an act or condi-
tion which CAN lead to serious personal injury or
death if not avoided.
CAUTiON
The safety alert symbol accompanied by the word
"CAUTION" calls attention to an act or condition
which may lead to minor or moderate personal
injury if not avoided.

InTernaTIonal symbols

Symbol
Symbol form/shape
description/application
Read and understand
Operator's Manual.
wear eyes, ears and
head protection
Hot
Surface
Safety/Alert
or sparks near fuel.

personal CondITIon and safeTy equIpmenT

wARNiNg
SHRED'N'VAC users risk injury to themselves and others if the SHRED'N'VAC
®
precautions are not followed. Proper clothing and safety gear must be worn when operating SHRED'N'VAC
Symbol
Symbol form/shape
description/application
Fuel and oil mixture
Finger Severing
wear hand
protection. Use
two handed.
wear slip resistant
foot wear.
DO NOT smoke
near fuel.
DO NOT allow flames
S
O
peratOr
CiRClE AND SlASH SyMbOl
This symbol means the specific action
shown is prohibited. Ignoring these prohi-
bitions can result in serious or fatal injury.
NOTE
This enclosed message provides tips for use, care
and maintenance of the unit.
IMPORTANT
The enclosed message provides information nec-
essary for the protection of the unit.
Symbol
Symbol form/shape
description/application
Emergency stop
Carburetor adjustment
- low speed mixture
Carburetor adjustment
- idle speed
Choke Control
"Cold Start"
Position
(Choke Closed)
idle Speed
is used improperly and/or safety
®
'N'V
®
hred ac
' M
S aNual
Symbol
Symbol form/shape
description/application
ignition
ON/OFF
Primer bulb
Carburetor adjustment
- High speed mixture
Choke Control
"Run"
Position
(Choke Open)
Fast Speed
.
®
3