Tv Components; Front And Side Controls; Back Connections - Dynex DX-32L130A10 User Manual

TV components

TV components

Front and side controls

6
7
# Component Description
1 MENU Press to open the on-screen menu.
2 INPUT Press to select the video input source.
3 Press to increase or decrease the volume.
VOL /
4 Press to go to the next or previous channel
CH /
in the channel list.
5 (power) button Press to turn on your TV. Press again to put
your TV in standby mode.
6 Power/Standby Lights blue when your TV is turned on.
indicator Lights red when your TV is in standby mode.
7 Remote sensor Receives signals from the remote control.
Do not block.

Back connections

1
HDMI2
2
7
L
3
6
4
5
5
# Component
1 HDMI1 and
HDMI2 jacks
2 VGA AUDIO IN
jack
3 PC VGA jack
4 COMP2 (Y, Pb, Pr
and audio L and R)
jacks
5 AC IN
6 COMP1 (Y, Pb, Pr
and audio L and R)
jacks
7 AUDIO OUT jacks
(L and R)
DX-32L130A10
2 3
1
VGA
VGA
AUDIO IN
HDMI1
AUDIO OUT
R
L
Y P P L R L R
B R
R
COMP2
COMP1
Description
Connect an HDMI device, such as a cable
box or DVD player, to one of these jacks. An
HDMI cable carries both video and audio,
so you do not need to make an audio
connection. For more information, see
"Connecting an HDMI device" on page 10.
Connect the mini plug from your
computer's sound card output to this jack.
For more information, see "Connecting a
computer" on page 12.
Connect a 15-pin VGA cable from a
computer to this jack. For more
information, see "Connecting a computer"
on page 12.
Connect a component video device to
these jacks. Cables are often color-coded to
connectors. For more information, see
"Connecting a component video device" on
page 11.
Connect the AC power cord to this
connector.
Connect a component video device to
these jacks. Cables are often color-coded to
connectors. For more information, see
"Connecting a component video device" on
page 11.
Connect audio cables (L and R) from these
jacks to an external audio amplifier or
receiver.
5
4