Connecting A Computer; Connecting Headphones; Connecting An External Sound System - Dynex DX-32L130A10 User Manual

12
DX-32L130A10

Connecting a computer

Tip: Some computers have an HDMI connector, which can be
used for a better picture.
To connect a computer:
1 Make sure that your TV's power cord is
unplugged and the computer is turned off.
2 Connect a VGA cable to the VGA jack on the
computer, then connect the other end of the
cable to the VGA jack on the back of your TV.
Note: The VGA cable should be a 15-pin D-Sub (analog RGB)
cable.
Audio cable (stereo mini plugs)
HDMI2 HDMI1
AUDIO OUT
L R
COMP1
Computer
3 Connect an audio cable to the AUDIO OUT jack
on the computer, then connect the other end of
the cable to the VGA AUDIO IN jack on the back
of your TV.
Note: The audio cable should have a stereo mini plug.
To play video from a computer:
1 Turn on your TV, then press INPUT. The INPUT
SOURCE menu opens.
2 Press
or to select VGA, then press ENTER.
3 Turn on the computer, then adjust the display
properties, if necessary.
L
Y P
P L R
B R
R
COMP2
Back of TV
VGA cable

Connecting headphones

To connect headphones:
• Connect your headphones to the HEADPHONE
jack on the side of your TV.
Side of TV
Note: Loud noise can damage your hearing. When using
headphones, use the lowest volume setting that still lets
you hear the sound.

Connecting an external sound system

To connect an external audio device:
1 Make sure that your TV's power cord is
unplugged and the component video device is
turned off.
2 Connect an analog audio (L and R) cable to the
Audio Out (L/R) jacks on the back of your TV.
- OR -
Connect a digital coaxial cable to the DIGITAL
OUTPUT jack on the side of your TV.
HDMI2 HDMI1
AUDIO OUT
HDMI1
L R
L
Y P
P L R
B R
R
COMP2
COMP1
Analog audio cables
Stereo
3 Connect the other end of the analog audio (L
and R) cable to the AUDIO IN jacks on the
analog stereo receiver.
- OR -
Connect the other end of the digital coaxial
cable to the DIGITAL INPUT jack on the digital
amplifier.
To play audio from a digital sound system:
1 Turn on your TV.
2 Turn on the external audio device and set it to
the correct output mode. See the audio device's
user guide for more information.
Making connections
Headphones
Back of TV
Side of TV
VIDEO
L
R
O S-VIDE HEADP
Digital optical (Toslink)
audio cable
Digital amplifier