It makes a difference how and where you use As you enjoy your new product, keep these The issue The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations.
DX-32L130A10 Important safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV. This symbol indicates that there are...
These non-active pixels do not adversely affect the performance of your TV, and are not considered defects. DX-32L130A10 Antenna lead-in wire Grounding clamp Antenna discharge unit Grounding conductors...
DX-32L130A10 Installing and removing the stand You must install your TV into the stand for it to stand upright on a cabinet or other flat surface. If you intend to mount your TV on a wall or other vertical surface, you must remove the stand column.
For more information, see “Connecting a component video device” on page 11. AUDIO OUT jacks Connect audio cables (L and R) from these (L and R) jacks to an external audio amplifier or receiver. DX-32L130A10 AUDIO IN L R COMP2...
DX-32L130A10 Side connections Component Description ANT/CABLE IN Connect an antenna, cable TV, or a satellite jack box to this jack. For more information, see “Connecting an antenna, cable TV, or satellite TV box” on page 9. SERVICE port For service update only. Do not use.
Do not place the remote control in direct sunlight. Do not place objects, such as furniture, between the remote The remote control may not work if direct sunlight or bright DX-32L130A10 Chemicals may leak into the battery compartment. Battery chemicals can cause a rash. If chemicals leak, clean the battery compartment with a cloth.
You will use the numbered code to program your remote control to work with your TV. Dynex TV codes for universal remote controls (for all Dynex TVs manufactured after Jan. 1, 2007) Universal remote control manufacturer and model Philips One for All...
Connect yellow to yellow, red to red, and white to white. Cables may be separate or combined. DX-32L130A10 ANT/CABLE IN jack on the side of your TV. Antenna, cable TV, or satellite box Side of TV Notes: Use a coaxial cable to eliminate interference and noise from radio waves.
DX-32L130A10 3 Connect the other end of the AV cable to the AV VIDEO and L and R audio jacks on the side of your TV. To play from the VCR: 1 Turn on your TV, then press INPUT. The INPUT SOURCE menu opens.
SOURCE menu opens. 2 Press ENTER. 3 Turn on the S-video device and set it to the correct output mode. See the S-video device’s user guide for more information. DX-32L130A10 Side of TV S-video cable Audio cable VIDEO R S-VIDEO...
DX-32L130A10 Connecting a computer Tip: Some computers have an HDMI connector, which can be used for a better picture. To connect a computer: 1 Make sure that your TV’s power cord is unplugged and the computer is turned off. 2 Connect a VGA cable to the VGA jack on the computer, then connect the other end of the cable to the VGA jack on the back of your TV.
3 Press ENTER. The setup wizard starts with the Language screen. 4 Press to select the language you want, then press ENTER. The Tuner screen opens. DX-32L130A10 5 Press to select Antenna or Cable, then press ENTER. The Channel Scan screen opens. 6 Press to select Scan, then press ENTER.
DX-32L130A10 You can choose from TV, AV, S-video, Component 1, Component 2, VGA, HDMI1,or HDMI2. On-screen menu overview Use the on-screen menu to configure the various operational settings of your TV. To access the menu, press MENU. The menus and their corresponding...
For example, 5.1 indicates sub-channel 1 of main channel 5. DX-32L130A10 Adjusting the volume To adjust the volume: • Press VOL+ or VOL– to increase or decrease the volume.
DX-32L130A10 • Contrast–Lets you increase or decrease the contrast of the picture. Increase the contrast to adjust the white areas of the picture or decrease the contrast to adjust the black areas of the picture. • Saturation–Lets you adjust the intensity of the colors.
TV. Removing the AC power and reconnecting it resets this function back to default. DX-32L130A10 Note: As you block ratings, all ratings higher than the ones you select are blocked as well. For example, if you choose to block the MPAA rating R, the higher ratings, NC-17 and X, are automatically blocked too.
DX-32L130A10 Adjusting the setup To adjust the setup: 1 Press MENU. The Main menu opens. 2 Press to highlight Setup, then press ENTER or . The Setup menu opens. 3 Press to highlight an option, then press to adjust or set the option. You can select: •...
If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again. Contact us by logging on to www.dynexproducts.com or by calling DYNEX Customer Service at (800) 304-2204 (USA and Canada only). Maintenance...
Page 23
DX-32L130A10 FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment. Canada ICES-003 statement This Class B digital apparatus complies with Canadian ICES-003.
One-year limited warranty Dynex Products (“Dynex”) warrants to you, the original purchaser of this new DX-32L130A10 (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the date of your purchase of the Product (“Warranty Period”).