Table of Contents
Advertisement
Maintenance and Troubleshooting
1.Cleaning the projector
Clean the projector cabinet by wiping it gently with a soft cloth.If necessary,
the cabinet can be cleaned using a neutral detergent and a soft cloth ensure th
case
WARNING
2.Cleaning the lens
Use a commercially available air blower, or use lens cleaning paper and lens
cleaner approved for use on optical coatings.
Do not clean the lens with harsh materials or subject the lens to shock, as it
can easily become damaged. Close the lens cover when the projector not
in use.
3.Change Air Filter
When the air filter becomes clogged with dust, etc., the projector may overheat
and turn itself off to prevent internal damage.
Clean the air filter every 100-hours.
*If the filter is difficult to clean or if it is deteriorating, it should be replaced
1.Remove the filter cover from the bottom of projector.
2.Pull out the air filter.
3.Install the new air filter.
Always unplug the projector before performing any
maintenance.
AIR FILTER COVER
48
Advertisement
Table of Contents
