Bluetooth Settings - Dual XHD7714 Installation & Owner's Manual

Function
Last Number Dialing
Audio Transfer
Call Waiting
Call Hold
Menu Function
Bluetooth Mode
Auto Connect
Auto Answer
Bluetooth Audio
*See page 7 for Setup Menu navigation
To enter last number dialing mode, press , then press
second time. The head unit will display "LASTCALL MENU."
Press DISP to cycle through the received, dialed or missed call
categories. Rotate the volume knob to cycle through the last 5
calls in the selected category.
Press to begin dialing the selected number. "DIALING" will
appear on the head unit display.
To transfer the phone call between the head unit and the mobile
device, press and hold DISP for 3 seconds during a call. Tip:
transfer audio to your mobile device before turning the head unit
off.
When a second call is incoming, press
The current call will be placed on hold, and the second call will be
active. Press again to return to the first call.
Press to place the current call on hold. To resume the phone
call, press again.
Options
BT ON Enables Bluetooth mode. The Bluetooth icon will
flash every 10 seconds.
BT OFF Disables Bluetooth support.
AUTO-CON Allows the XHD7714 to automatically (re)connect to
ON the most recently connected mobile device. Note:
Some mobile devices do not support this feature.
AUTO-CON
Disables the auto connect feature. You must press
OFF
every time to connect a mobile device.
AUTO-ANS
Disables the auto answer feature. Press
OFF
an incoming call.
AUTO-ANS All incoming calls will be answered automatically -
ON without notification.
SPK 2-CH Directs the Bluetooth audio to the front speakers.
SPK 4-CH Directs the Bluetooth audio to all 4 speakers.
XHD7714 OPERATION
Bluetooth
Description
to activate call waiting.
Bluetooth Setup Menu
Action
Settings
®
a
to receive
27