Screen Setup - Touch Screen Calibration - Dual XDVDN8190 Installation & Owner's Manual

Dvd multimedia receiver with internal gps navigation and 7” touch screen display

Hide thumbs Also See for XDVDN8190:

Table of Contents

Upon initial installation or

occasionally, the touch screen may

have to be calibrated. Follow these

steps as described.

SCREEN Setup - Touch Screen Calibration

Step 1

1) Touch top left corner of screen.

Step 2

2) Touch SCREEN icon.

Step 3 & 4

3) Touch No in TS Calibration row.

4) Then touch Yes.

Step 5 & 6

5) Touch and hold the pointers as indicated on the screen for 2 seconds each.

6) Screen will automatically return to MAIN MENU, touch RETURN to exit.

XDVDN8190

OPERATION

Notes: For proper calibration

you must touch each pointer for

2 seconds. If pointers are not

touched properly, the calibration

sequence will start over until the

calibration is done correctly.

Table of Contents

Show Quick Links

Table of Contents