Anti-Theft Code - Dual XDVDN8290 Installation & Owner's Manual

XDVDN8290
GENERAL Setup - Menu
General Setup Menu
Settings Default
Bluetooth

Anti-theft Code

Anti-theft active
Load Factory
defaults
21
OPERATION
Press GENERAL icon to access the GENERAL setup mode.
•
Press PAGE icon in the lower right corner.
•
Select desired parameter you wish to change.
•
Page will return back to previous screen after 15 seconds of inactivity or
•
by pressing the RETURN button.
GENERAL Setup Menu matrix - page 2
Options
Off Off
On
0000 ----
Off On
Off
Yes Are you
sure?
Yes/Cancel
Turns off the Bluetooth functionality
Enables Bluetooth functionality
Must enter password to turn anti-theft on or off
System will require a password if main battery power is
removed for more then 40 seconds
No password will be required if power is removed
Load all factory parameters to their original settlings,
Notes: This will not reset the anti-theft password.
Default anti-theft password is 0000.
Function