XDVDN8290
Control Locations - Monitor Closed
1
2
3
4
5
6
Monitor Notes:
This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will
•
not obstruct the dash, shifter or any other controls.
Upon installation, do not attempt to move the monitor by hand. Use the
•
the OPEN button on the remote control.
The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the
•
obstacle and press
9
OPERATION
Power/Mute
1
AM/FM Mode - Hotkey
2
Auto Store/Preset Scan
3
4
Mode
5
Menu
6
Rotary Encoder/Enter
7
Navigation Mode - Hotkey
or OPEN again to resume the monitor open/close sequence.
14
Channel/Chapter/Track Up/Zoom Out
8
Channel/Chapter/Track Down/Zoom In
9
Position Button (Navigation only)
10
11
Info/Picture
12
Reset
13
Open/Close Monitor/Angle Adjust
button on the front panel only or
7
8
9
10
11
12
13