All manuals and user guides at all-guides.com
Q-Wash 260-LED QRG
About this
The Q-Wash 260-LED Quick Reference Guide (QRG) only contains
the product's connection and mounting information, as well as the
Guide
menu options and the DMX values.
This Quick Reference Guide DOES NOT replace the product's
Make sure to download the latest version of the product's User
Disclaimer
You must read ALL the disclaimers and safety notes in this
DO NOT open this product unless instructed. It contains no user
Safety Notes
DO NOT look at the light source when this product is on.
DO NOT touch the product when it is operating because it may
DO NOT cover the ventilation slots when the product is
DO NOT install or operate this product where there is less than
DO NOT leave any flammable material within 50 cm from this
DO NOT carry this product from the head. Use the handles
DO NOT mount this product overhead without using a safety
DO NOT operate this product outdoors or in any location where
DO NOT operate this product if you see damage on the housing,
DO NOT connect this product to a dimmer or rheostat.
ONLY connect this product to a grounded and protected circuit.
One Q-Wash 260-LED
What is
One locking IEC to Edison plug input power cord (US market)
Included
Two hanging brackets
Four M8 bolts (6 mm head)
One safety cable
One custom cut, removable 1° Color Blending Filter
One Warranty Card
One Quick Reference Guide
User Manual.
Manual from (www.chauvetlighting.com).
document as well as those in the product's User Manual before
installing, operating, or maintaining this product.
serviceable parts.
be hot.
operating to avoid internal overheating.
50 cm to the nearest surface to allow adequate ventilation around
it.
product while operating or connected to the power outlet to
minimize the risk of fire.
instead.
cable.
dust, excessive heat, water, or humidity may affect it.
lenses, or cables. In any of these cases, have the damaged parts
replaced by an authorized technician at once.
Page 2 of 10