Table of Contents
Advertisement
1. Enable Wireless LAN:
Check the box to enable wireless function.
2. Mode:
Select an appropriate wireless mode.
Mixed (11b+11g): The radio can support both IEEE802.11b and
IEEE802.11g protocols simultaneously.
11g-only: The radio only supports IEEE802.11g protocol.
11b-only: The radio only supports IEEE802.11b protocol.
3. Scheduler:
Set the wireless LAN to work at some time interval only. You may choose
up to 4 out of 15 schedules that should be defined under Advanced
Setup > Call Schedule Setup. Please refer to the User's Guide.
4. SSID and Channel:
The default SSID is "default". We suggest you change it to a particular
name. In this case, SSID was changed to "DrayTek".
SSID (Service Set Identifier): It is used to name the wireless LAN, and
must have the same content in client PC/notebook wireless card(s). SSID
can be any text numbers or various special characters.
Channel: A wireless channel for the router. The default channel is 6. You
can change it to more appropriate one if the selected channel is under
serious interference.
5. Hide SSID:
Check it to prevent from wireless sniffing and make it harder for
unauthorized clients to join your wireless LAN.
3.2 Security
Click Security to configure the security options.
15
Advertisement
Table of Contents
