Dish Network Solo 111 User Manual page 41

W Y H L
HEN OU AVE OCKED THE
If you try to access a locked item or open the
menu, the receiver displays a message prompting you to enter the password.
The receiver allows you three tries to enter the correct password. If you fail
to enter the correct password, the receiver does not allow more tries for
several minutes.
If you enter the correct password, you can access the locked item or open
the
Parental and System Locks
If you exit a locked item or close the
you must enter the password again to access the item or open the menu
again.
If you forget your password, you will need to speak with
a Customer Service Representative and may need to
provide some information related to your account including
a Personal Identification Number (PIN), if used. See
page 44 for information on PINs.
C P
REATING A ASSWORD
You must lock the receiver for any receiver
effect. To lock the receiver, you must first create a password. If you forget
your password, you will need to call the Customer Service Center at 1-800-
333-DISH (3474).
To create a password:
1. Press the MENU button to display the
2. Select the Locks
System Locks
Note : If the receiver displays a message prompting you to
enter a password, the receiver has already been locked.
3. Select the
Lock System o
message prompting you to enter a password.
Note : If this option appears as
the receiver is already locked.
4. Enter and verify a password, using the number pad buttons. The
receiver displays stars (*) as you enter the digits of the password.
5. Memorize your password. From now on, you must enter this password
to lock or unlock the receiver.
6. Highlight and select the
locks you have set are now in effect.
R
ECEIVER
menu.
Parental and System Locks
Main
option to display the Parental and
menu.
ption. The receiver displays a
Unlock System
option. Re-enter the password. All the
OK
Parental and System Locks
menu,
Parental Locks you set to take
menu.
instead,
Using Locks
lPage 37