Dish Network 123698 User Manual page 43

Chapter 3
Using the System
Tip: You may start
any timer one
minute early. But if
you set back-to-
back event timers
and the second one
starts early, the first
one will end early.
An event timer
cannot start early
for a pay per view
program. If you try
to set a timer for
overlapping events,
you will get an error
message.
Tip: Use the
Program Guide or
your printed
television guide
to see when the
program(s) starts
and stops —
before you go to
the Set Date/TIme
for Manual Timer
menu.
Page 38
3. Select a Timer Frequency option. Notice that a check mark displays
in the box selected.
Select the
Create
4.
5. The receiver displays a timer symbol in the Program Guide, and also
when you press the INFO button to get information about the program.
Setting Up a Manual Event Timer
1. Press the MENU button.
2. Select the Timers option.
3. Select the Create option. The receiver displays the Create
a Manual Event Timer menu.
4. Select a Timer Type option.
5. Select a Timer Frequency option.
6. Select a channel:
• Highlight a channel using the UP or DOWN
ARROW button. Then, press the SELECT button.
• Enter a channel number using the NUMBER PAD
buttons.
7. Select the Date/Time option. The receiver displays
the Set Date/Time for Manual Timer menu.
8. Use the NUMBER PAD buttons to enter the Start Time (this includes
selecting AM or PM) and the End Time (this includes selecting AM or
PM).
9. Use the NUMBER PAD buttons to enter the Date.
option to save the event timer.