HP Proliant DL140 Maintenance And Service Manual page 33

System drive cable connections
This section highlights the location of the system board connectors for the system drives' data cables.
IMPORTANT: Observe the cable management guidelines listed on page 30 when routing the drive
cables.
NOTE: The data cable of a SAS hard drive should be connected to the installed SAS controller
board.
Optical media drive cables
Figure 4 Optical media drive cable connections
Item Description
1 IDE data cable
2 Optical media drive power cable
Hard drive cables
Non-hot-plug SATA hard drive cables
Non-hot-plug SATA HDD cable connections
Figure 5
Item Description
1 Non-hot-plug SATA drive power cable
2 Non-hot-plug SATA data cable
All manuals and user guides at all-guides.com
Contents 33