Cleaning And Maintenance - Russell Hobbs RHEM42G Instructions And Warranty

CLEANING AND MAINTENANCE

•
This appliance is for household use only and is not user-serviceable.
•
Do not open or change any parts by yourself. Please refer to a
qualified electrical service department or return to the supplier if
servicing is necessary.
•
Turn off the oven and remove the power plug from the wall socket
before cleaning.
•
Keep the inside of the oven clean. When food splatters or spilled
liquids adhere to oven walls, wipe with a damp cloth. Mild detergent
may be used if the oven gets very dirty. Avoid the use of spray and
other harsh cleaners as they may stain, streak or dull the door surface.
•
The outside surfaces should be cleaned with a damp cloth. To prevent
damage to the operating parts inside the oven, water should not be
allowed to seep into the ventilation openings.
•
Wipe the door and window on both sides, the door seals and adjacent
parts frequently with a damp cloth to remove any spills or spatters. Do
not use abrasive cleaner.
•
Do not allow the control panel to become wet. Clean with a soft, damp
cloth. When cleaning the control panel, leave oven door open to
prevent oven from accidentally turning on.
•
If steam accumulates inside or around the outside of the oven door,
wipe with a soft cloth. This may occur when the microwave oven is
operated under high humidity condition. And it is normal.
•
It is occasionally necessary to remove the glass tray for cleaning.
Wash the tray in warm sudsy water or in a dishwasher.
•
The roller ring and oven floor should be cleaned regularly to avoid
excessive noise. Simply wipe the bottom surface of the oven with mild
detergent. The roller ring may be washed in mild sudsy water or