Mmv Control Mounting 48/50P040 Units - Carrier MOTORMASTER 48/50P3 Installation Instructions Manual

48/50p2,p3,p4,p5030-100 low ambient operation motormaster v control accessory 50/60 hz

Table of Contents

RUN ELECTRICAL HARNESSES UP THE SIDE

OF THE UNIT IN THE SPACE BETWEEN THE

CORNER POST AND THE CONTROL BOX, THEN

ALONGSIDE THE WIRE TRAY. ROUTE

APPROPRIATE WIRES TO MOTORMASTER AND

OFM 3

RUN TRANSDUCER HARNESS FROM CIRCUIT A

TRANSDUCER TO MOTORMASTER ALONG THE LENGTH OF

THE BOTTOM OF THE CONDENSER COIL THEN UP INTO

MOTORMASTER. RUN THE WIRES ALONG THE OUTSIDE

OF THE COIL TRAY.

RUN ELECTRICAL HARNESSES UP THE SIDE OF THE

UNIT IN THE SPACE BETWEEN THE CORNER POST

AND THE CONTROL BOX, THEN ALONGSIDE THE WIRE

TRAY. ROUTE APPROPRIATE WIRES TO

MOTORMASTER AND OFM 1

RUN TRANSDUCER HARNESS FROM CIRCUIT A

TRANSDUCER TO MOTORMASTER ALONG THE

LENGTH OF THE BOTTOM OF THE CONDENSER COIL

THEN UP INTO MOTORMASTER. RUN THE WIRES

ALONG THE OUTSIDE OF THE COIL TRAY.

REMOVE PANEL

Fig. 5 — MMV Control Mounting — 48/50P040 Units

REMOVE PANEL

Fig. 6 — MMV Control Mounting — 48/50P050-060 Units

MOTORMASTER

CONTROL

a48-8563

MOTORMASTER

CONTROL

a48-8564

Table of Contents

Show Quick Links

Table of Contents