Set Up Speakers - Denon AVR-1611 Owner's Manual

Set up speakers

Here we describe how to set up speakers other than 5.1-channel speakers.
For the method of setting up 5.1-channel speakers, see "Simple version", "Set up speakers (Audyssey ® Auto Setup)" (vpage 6).
First install and connect the speakers to this unit.
1
Set up
the remote control unit
n Set up the zone mode
Press ZONE SELECT to switch the
zone mode to "MAIN".
The "MAIN" indicator lights.
Press ZONE SELECT
n Set up the operation mode
AMP
Press to set the remote control
unit to amplifier operation mode.
Press AMP
Remote control operation
buttons
2
Connect the setup microphone.
When the setup microphone is
connected, the following screen is
displayed.
3-1.Audyssey Auto Setup
MultEQ
Please place microphone
at ear height at
main listening position.
Amp Assign:
ZONE2
Start
Cancel
[ENT]:Select [RTN]:Back
3
Use to select "Amp Assign".
ui
3-1.Audyssey Auto Setup
MultEQ
Please place microphone
at ear height at
main listening position.
Amp Assign:
ZONE2
Start
Cancel
[RTN]:Back
Move the cursor
(Up/Down/Left/Right)
4
Use o p to select the configuration
of the connected speakers.
Set when using 7.1-channel
Normal
(Front/Center/Surround/Surround
Back/Subwoofer) speakers.
Set for connecting the speakers
ZONE2
for ZONE2 to the SURR. BACK/
AMP ASSIGN terminals.
Set for connecting the front
Front Height
height speakers to the SURR.
BACK/AMP ASSIGN terminals.
Set for connecting a tweeter of
Front Bi-Amp
a front speaker to the SURR.
BACK/AMP ASSIGN terminals
and a woofer of the front speaker
to the FRONT terminals.
Set for connecting the second set
Front B
of front speakers to the SURR.
BACK/AMP ASSIGN terminals. In
this case, go to step 5.
5
GWhen "Front B" is selected in
step 4H
q Use ui to select "Front Sp.".
w Press o p to select a speaker.
A Select this to use front speaker A.
B Select this to use front speaker B.
A+B Select this to use front speakers A and B
simultaneously.
Confirm the setting
ENGLISH
around items indicate the settings.
6
Proceed to page 8
" Preparation " step 5.
NOTE
After performing Audyssey Auto Setup, do not
change the speaker connections or subwoofer
volume. In event of a change, perform Audyssey
Auto Setup again.
Return to previous menu
31