Playing Cds; Normal Playback - Denon RCD-M33 Operating Instructions Manual

11

PLAYING CDs

Normal Playback

1, 3
Example: Playing a disc containing 15 tracks and with a playing time of 62 minutes, 3
seconds, starting from the first track.
Press the 5 (open/close) button to open the
1
disc tray.
2 Load the CD in the disc tray.
5
Press the (open/close) button. The disc
tray closes.
3
• After several seconds, the disc
information is displayed.
1 3
Press the / (play/pause)
4
button.
Main unit
4
4
Main unit
Main unit
Remote control unit
2 (stop) button
1 / 3 (play/pause) button
Interrupting playback temporarily
1 3
Press the / (play/pause)
button.
3
The " " mark appears on the
1
display, and playback stops at
the point where the button was Main unit
pressed.
Resuming playback
1 3
Press the / (play/pause)
button.
3
The " " mark turns off on the
1
display, and playback resumes
Main unit
from the point where the pause
button was pressed.
Stopping playback
2
1 Press the (stop) button.
Main unit
NOTES:
• When a disc is loaded, "LOADING" is displayed on the display for several seconds while the
data on the number of tracks and total playing time is being read from the innermost side of
the disc, after which the number of tracks and total playing time appear.
• The CD SRS button of the cassette deck will not function if pressed while the disc is being
read. Please press this button after the total playing time
has been displayed.
• If no disc is loaded, if the disc is upside down, or if the data
cannot be read properly due to scratches or dirt, the display
reads as shown below and the disc will not play.
ENGLISH
1 3
/
(play/pause)
button
2
(stop) button
Remote control unit
Remote control unit
Remote control unit
19