Procedure when the distance is > 5 m (extended and PRO version)
Figure 2-5
(1)
(2)
(3)
(4)
(5)
(6)
1. Plug the female connector of the long USB connecting cable (1) into the port (2)
2. Plug the USB connecting cable (1) into the port (4) () on the USB transmitter module (5).
3. Use the second, short USB connecting cable (6) to connect the USB transmitter module
4. Connect the DVI cable to the Flat Panel and the computer unit.
Flat Panel
Operating Instructions (Compact), 09/2008, A5E02313712-01
www.aotewell.com
Cable connection
Long connecting cable
USB link on the control unit
Operating unit
USB-connection on the USB transmitter module
USB-transmitter module
Short connecting cable
(USB link) on the control unit (3).
The control unit is connected to the USB transmitter module.
to the computer unit.
sales@aotewell.com
Industry Automation
Unpack and connect the device
2.6 Connecting the Cables
+86-755-8660-6182
13