Advertisement
Turn off the unit.
Press the up ( ) and down ( ) buttons together
for 3 seconds to activate the dip switch
configurations by panel control (see Fig.4).
See Table 1 for dip switch configurations and
functions by panel control.
NOTE: Press the up ( ) and down ( ) buttons
together for 3 seconds again or no operation
within 30 seconds to exit the dip switch
configurations by panel control and the unit will
save the last settings.
- Display function settings with 2 digitals in LED
display window, high (left) for dip switches,
low (right) for functions (see Fig.4).
- Press up ( ) button to set the dip switches, press
down ( ) button to set the functions.
power. When power comes back on, the settings are activated.
Advertisement
