HP StorageWorks All-in-One SB600c Storage Blade Solution User Manual page 30

CAUTION:
Heatsink retaining screws should be tightened in diagonally opposite pairs (in an "X"
pattern).
16.
Install the front panel/hard drive cage assembly.
17.
Install the hard drive backplane. Press down on the connector to seat the board.
18.
Install the hard drives.
19.
Install the access panel. See
20.
Install the server blade. See
for more information.
30
Hardware Options installation and cabling
Installing the access panel
Installing the HP AiO SB600c Server and Storage Blades
on page 22 for more information.
on page 13