Panasonic RX-D10 Service Manual page 25

Portable stereo cd system

Hide thumbs Also See for RX-D10:

100 mA (FM & AM)

180 mA (FM REC & AM REC)

150 mA (TAPE Playback)

240 mA (CD)

290 mA (CD REC)

Volume maximum :

300 mA (FM & AM)

380 mA (FM REC & AM REC)

440 mA (TAPE Playback)

590 mA (CD)

690 mA (CD REC)

The voltage value and waveforms are the reference voltage of this unit measured

by DC electronic voltmeter (high impedance) and oscilloscope on the basis of

chassis. Accordingly, there may arise some error in voltage values and

waveforms depending upon the internal impedance of the tester or the

measuring unit.

Importance safety notice:

Components identifed by

safety. Furthermore, special parts which have purposes of fire-retardant

(resistors), high-quality sound (capacitors), low-noise (resistors), etc. are used.

When replacing any of components, be sure to use only manufacturer's specified

parts shown in the parts list.

Caution!

IC, LSI and VLSI are sensitive to static electricity.

Secondary trouble can be prevented by taking care during repair.

Cover the parts boxes made of plastics with aluminium foil.

Put a conductive mat on the work table.

Ground the soldering iron.

Do not touch the pins of IC, LSI or VLSI with fingers directly.

No mark

...Playback

(( ))

...CD

mark have special characteristics important for

< >

...FM

( )

...AM