Panasonic RX-D10 Service Manual page 10

Portable stereo cd system

Hide thumbs Also See for RX-D10:

7. Self-Diagnostic Functions

7.1. Setting of the Self-Diagnostic Mode

1. Switch the SELECTOR to CD and set to TAPE STOP state. (CD PLAY

2. Press the

/CLEAR for the first two seconds and followed by the FAST

FORWARD keys for another two seconds without releasing the

shall enter into the Self-Diagnostic mode.

3. At the state of [ T ] display, operate as follows:

- Open the CD lid and close it right away.

- Start recording TAPE, and STOP it at once.

4. Press

/CLEAR key.

- Self diagnostic results, i.e. the memorized errors during actual operations

and the result of above-mentioned operation shall be displayed alternately.

- If there is no error, the aforementioned display [ T ], shall be kept.

- If the operation in the above mentioned in 4 is made without executing the

procedure in 3, [ H16 ] and [ F69 ] shall be displayed.

7.2. Display Location

STOP)

/CLEAR key, it