Motorola APX 2000 User Manual page 19

Dynamic Priority (Conventional Only)
Allows any channel in a Scan List (except for a Priority-One channel) to temporarily replace the
Priority-Two channel.
Emergency
Depending on the programming, initiates or cancels an emergency alarm or call.
In-Call User Alert
Allows the radio to remain muted to affiliated talkgroup calls while operating on the current Trunking
Personality or conventional channel.
Internet Protocol Address
Displays the Internet Protocol (IP) address, device name, and status of the radio.
Mode Select
Long press – Assigns the current zone and channel to a programmable button.
Short press – Changes to the preset Mode Select zone and channel.
Monitor (Conventional Only)
Monitors a selected channel for all radio traffic until the function is disabled.
Nuisance Delete
Temporarily removes an unwanted channel, except for priority channels and the designated
transmit channel from the scan list.
Private Line Defeat (Conventional Only)
Overrides any coded squelch (DPL or PL) that is preprogrammed to a channel.
Private Line Disable
Allows you to adjust the desired squelch level of the radio.
Priority Dispatch
Allows you to call the dispatcher on a different talkgroup.
Remote Monitor
Enables the system administrator to remotely command a targeted radio.
Repeater Access Button (RAB) (Conventional Only)
Allows you to manually send a repeater access codeword.
Reprogram Request (Trunking Only)
Notifies the dispatcher that a new dynamic regrouping assignment is needed.
Request-To-Talk (Conventional Only)
Notifies the dispatcher that you want to send a voice call.
Scan
Short press – Toggles the scan function between on and off.
Long press – Enables Scan List Programming and selects the scan list for editing.
Secure Transmission Select
Toggles secure transmission between on and off.
Site Display/Search (Trunking Only)
Short press – Displays the current site ID and Received Signal Strength Indicator (RSSI) value.
Long press – Performs site search for Automatic Multiple Site Select (AMSS) or SmartZone
operation (long press).
Site Lock/Unlock (Trunking Only)
Allows your radio to lock onto a specific site.
Talkaround/Direct (Conventional Only)
Toggles between using a repeater or communicating directly with another radio.
68012005017-DP
Chapter 3 : Radio Controls
19