Changing the TV's Input
Normally, your TV displays the signal coming through the antenna terminal. However, If you've
connected another component to your TV(such as a VCR) using the Video/Audio input, you will
want to be able to view the signal from the component.
To do this, you will need to switch from the 'TV' input to the ' Line ' Input, as follows.
1 With the TV on, press the MENU button twice, then " Set-Up " menu will appear.
2 Use the VCHW buttons to select " Input ".
3 Press the CVOLB buttons to change from 'TV' to ' Line '.
4 Wait 10 seconds, or press the MENU button to return to normal TV viewing.
1
Set-Up
Language :
Reception :
Memorize Channels
Add/Delete Channels
Input :
Select
When it connected an Video/Audio cable from the Video/Audio out jack on the VCR to the
Video/Audio in jack on the front your TV, and your TV's back panel at the same time, the former
takes precedence of the latter.
14
Chapter 3 : Operating Your TV
English
Air
TV
Adjust
Next
2
Set-Up
Language :
English
Reception :
Air
Memorize Channels
Add/Delete Channels
Input :
TV
Select
Adjust
Next
3
Set-Up
Language :
English
Input :
Line
Select
Adjust
Next