Appendix
A Eliminating faults
Fault
Possible cause
Despite the water
The power supply to the
tap at the draw-
product has been inter-
off point being
rupted.
fully opened, the
The flow regulator in the
product does not
water tap at the draw-off
start.
point is calcified or dirty.
The water inlet is interrup-
ted.
10
Troubleshooting
Check the circuit breaker (fuse) and, if required,
switch it on.
Clean and/or descale the flow regulator or, if
required, replace it.
Purge the product and the cold water supply
pipe.
Operating instructions 0020323584_00