Advertisement
1.
While holding the stem, reach a
hand over your head and pull
ear up and back. (See Figure 7)
Figure 7
1.
Position band under your chin.
Use your hands to press the ear
pods well into the ear canal
using an inward motion.
(See Figure 10)
Figure 10
PROPER FIt
If either or both earplugs do not seem
to be fitted properly, remove the
earplug and reinsert. (See Figure 13)
Figure 13
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
PAGE 2 OF 2
multiple use
2. Insert the earplug so all flanges
are well inside your ear canal.
(See Figure 8)
Figure 8
banded
2. Protection levels are improved
by pulling the ear up and back
when fitting. (See Figure 11)
Figure 11
additional information
REMOvAl
Gently twist earplug while slowly
pulling in an outward motion to
remove. (See Figure 14)
Figure 14
1-800-295-5510
uline.com
3. If properly fitted, the tip of the
earplug stem may be visible to
someone looking at you from
the front. (See Figure 9)
Figure 9
3. In a noisy environment, lightly
press the band inward with your
fingertips. You should not notice
a significant difference in noise
level. (See Figure 12)
Figure 12
AcOUStIcAl cHEck
In a noisy environment, with
earplugs inserted, cup hands
over ears and release. Earplugs
should block enough noise so that
covering your ears with your hands
should not result in a significant
noise difference. (See Figure 15)
Figure 15
0814 IS-7902
Advertisement
