User Interface Setup - Kenwood DMX8018S Instruction Manual

User Interface Setup

You can setup user interface parameters.
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP screen appears. h
3
Touch [User Interface].
h User Interface screen appears.
h
4
Set each item as follows.
[Steering Remote Controller]
■
Sets the desired function in the steering
remote controller. See Learning function of
steering remote (P.42).
■ [Beep]
Turns the key touch tone on or off.
Default is "ON".
[Language Select]
■
Selects a language.
[Touch Panel Adjust]
■
Adjust the sensing position of touch panel.
(P.41)
■ [Clock]
[GPS-SYNC ](Default): Synchronizes the clock
time with the GPS.
[Manual]: Sets the clock manually
[Time Zone]
■
Select the time zone.
[Clock Adjust]
■
If you select [Manual] for Clock, adjust the
date and time manually. (P.41)
Ñ
Adjust the date and time
manually.
1
Touch [Clock] in the User Interface screen.
2
Select [Manual].
3
Touch [Time Zone] in the User Interface
screen.
4
Select the time zone.
5
Touch [Clock Adjust] in the User Interface
screen.
6
Adjust the date, then adjust the time.
7
Touch [Set].
Ñ
Touch panel adjustment
1
Touch [Touch Panel Adjust] on the User
Interface screen.
h Touch Panel Adjust screen appears. h
2
Follow the instruction on the screen and
touch and hold the center of each [
1
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset to the initial status, touch [Reset].
Setting Up
].
2
41
English