CARTON CONTENTS
1. Tray
2. Wheel Brackets (2)
3. Middle Brace
4. Hitch Bracket
7
8
TOOLS REQUIRED FOR ASSEMBLY
(2) 7/16" wrenches
(2) 1/2" wrenches
(2) 9/16" wrenches
(2) 3/4" wrenches or adjustable wrenches
•
Attach the lift lever assembly to the two holes in the
middle of the shaft using two 1/4" x 1-3/4" hex bolts
(B) and a 1/4" nylock nuts (K). Tighten. See figure 1.
1/4" x 1-3/4"
HEX BOLT (B)
FIGURE 1
5. Tongue
6. End Plates (2)
7. Lift Handle
8. Lift Lever Assembly
1
10
9
LIFT LEVER ASSEMBLY
1/4" NYLOCK
NUT (K)
ASSEMBLY
2
3
11
•
Push split plastic bearings (Y) into both ends of all
single and double spool assemblies. See figure 2.
SPLIT
BEARING (Y)
FIGURE 2
4
9. Single Spool Assemblies (2)
10. Shaft
11. Double Spool Assemblies (2)
12. Wheels (2)
4
5
12
CAUTION: Points of aerator knives
are sharp! Exercise caution at all times
while assembling and using the aerator.
SPLIT
BEARING (Y)
SPLIT
BEARING (Y)
6
SPLIT
BEARING (Y)