Table of Contents
Advertisement
Charging the Tablet
The tablet comes with a built-in rechargeable lithium-
polymer battery.
Before using the tablet, the battery should be charged
fully. The Status Indicator will light green when the bat-
tery is charged fully.
To charge the battery:
1.
Plug one end of the included power adapter into an
AC 100-240V outlet.
2.
Plug the other end of the included power adapter into
the Power jack on the tablet.
3.
Disconnect the power adapter when the tablet is fully
charged.
The Status Indicator will light orange when the
tablet is charging. The Status Indicator will light
green when the tablet is fully charged.
Page 12
The battery used in this device may present a fire
or chemical burn if mistreated. Do not disassemble,
incinerate, or heat the device. Do not leave the de-
vice in a place subject to direct sunlight, or in a car
with its windows closed. Do not connect the device
to a power source other than that which is indicated
here or on the label as this may result in the risk of
fire or electric shock.
inserting a Memory Card
The tablet accepts SD or SDHC memory cards. Insert a
memory card into the SD/SDHC card slot to:
Increase the memory capacity of your tablet
Play media files stored on the memory card (e.g.,
music, video, or photo files).
Getting To Know The Mid7005
Advertisement
Table of Contents
