Table of Contents
Advertisement
Charging the Tablet
The tablet comes with a built-in rechargeable lithium-
polymer battery.
Before using the tablet, the battery should be charged
fully. Press lower right corner settings, next to battery
icon is charging percentage.
To charge the battery:
1. Plug one end of the included power adapter into an
AC 100-240V outlet.
2. Plug the other end of the included power adapter into
the Power jack on the tablet.
3. Disconnect the power adapter when the tablet is fully
charged.
The battery used in this device may present a
not leave the de-vice in a place subject to direct
not connect the device to a power source other
than that which is indicated here or on the label
Page 10
Inserting a Memory Card or USB
Flash Drive
The tablet accepts microSDHC memory cards and USB
rately) is required to connect USB Flash Drives:
Increase the memory capacity of your tablet
To insert a memory card :
1. Align the memory card with the card slot. The metal
contacts of the memory card should face down away
from the LCD screen.
2. Slide the card into the spring-loaded slot. Push the
card in until it clicks into place.
To connect a USB Flash drive:
USB port (micro-USB or mini-USB).
On-the-Go (OTG) cable adapter that corresponds to your
USB port.
3. The USB OTG cable will adapt the Tablet's USB port
Getting To Know The Internet Tablet
-
Advertisement
Table of Contents
