AEG COMPETENCE B4101-4 User Information page 43

Inserting the middle door glass
1. Insert the middle glass panel at an
angle from above into the section
of the door in which the handle is
á
located ( ).
2. Lower the middle glass panel and
slide it under the lower bracket to-
wards the lower door edge as far as
à
it will go ( ).
Inserting the upper door glass
1. Insert the upper glass panel at an
angle from above into the section
of the door in which the handle is
á
located ( ).
2. Lower the glass panel. Lay the panel
against the spring on the lower
door edge in front of the retaining
section on the handle side, and slide
it under the retaining section (
The glass panel must be firmly in
position!
Re-hang the oven door
à
).
43