Please Read The Following Carefully; Troubleshooting - Central Hydraulics 66593 Set Up And Operating Instructions Manual

pLEASE REAd THE FOLLOWiNG CAREFuLLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT
HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR ExPRESSLy STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN By CERTIFIED AND LICENSED TECHNICIANS, AND NOT By THE BUyER. THE BUyER
ASSUMES ALL RISK AND LIABILITy ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
Jack will not raise the Lift Arm when pumping
the Foot pedal.
Wheels make noise when rolling the Jack or
raising the Lift Arm.
SKU 66593 For technical questions, please call 1-800-444-3353.

TROuBLESHOOTiNG

problem Solution
1. Bleed the Hydraulic Jack of excess air.
2. Valve Release Lever is in Position D. Move
the Lever to any other position making sure it
isn't stuck in the open position.
3. Purge air from the hydraulic system.
4. Make sure there is adequate hydraulic fluid in
the oil reservoir.
5. Take the Hydraulic Jack to a qualified shop for
inspection and repair.
1. Use grease gun to grease all Zerk Fittings
(4.3, 5.5, 7.10).
Page 9