Central Hydraulics 66593 Set Up And Operating Instructions Manual

10-ton long frame jack

Advertisement

Quick Links

10-TON LONG FRAME JACK
SET up ANd OpERATiNG iNSTRuCTiONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
distributed exclusively by Harbor Freight Tools
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THiS MANuAL.
©
Copyright
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Model
3491 Mission Oaks Blvd., Camarillo, CA 93011
2009 by Harbor Freight Tools
66593
®
. All rights reserved. No portion of this
®
.

Advertisement

Table of Contents
loading

Summary of Contents for Central Hydraulics 66593

  • Page 1 Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353. Model 66593 ® . All rights reserved. No portion of this ®...
  • Page 2: Important Safety Information

    SKU 66593 For technical questions, please call 1-800-444-3353. NOTiCE is used to Notice address practices not related to personal injury.
  • Page 3 If damaged, have the tool repaired at a qualified shop before use. Many accidents are caused by poorly maintained tools. SKU 66593 For technical questions, please call 1-800-444-3353. Use the tool and its accessories in accordance with these instructions...
  • Page 4 Use the Long Frame Jack only on vehicles whose frames have lifting points (on its seam or frame) capable of aligning with the Bottle Jack. SKU 66593 For technical questions, please call 1-800-444-3353. Do not use the Jack with the vehicle’s engine running. When running, the vehicle’s engine produces carbon...
  • Page 5: Specifications

    SKU 66593 For technical questions, please call 1-800-444-3353. Tool Set up iMpORTANT: The Jack comes filled with oil. But the hydraulic system must be bled prior to initial use.
  • Page 6 Note: The Handle is not locked in this position. position B: The Deflector Rod (1.3) is not engaged in the Base (2.6) when at this position. SKU 66593 For technical questions, please call 1-800-444-3353. Positioning Holes Fig 3 c. position C: Allows the Deflector Rod to drop into one of three holes (See Fig.
  • Page 7: Maintenance And Servicing

    SKU 66593 For technical questions, please call 1-800-444-3353. To lower the vehicle: When the work to the vehicle is com-...
  • Page 8: Bleeding Instructions

    (See Fig. 4.) Top off the hydraulic reservoir with fresh hydraulic jack fluid to a point SKU 66593 For technical questions, please call 1-800-444-3353. just below the oil Filler Plug (9.1) orifice.
  • Page 9: Please Read The Following Carefully

    Jack will not raise the Lift Arm when pumping the Foot pedal. Wheels make noise when rolling the Jack or raising the Lift Arm. SKU 66593 For technical questions, please call 1-800-444-3353. TROuBLESHOOTiNG Bleed the Hydraulic Jack of excess air.
  • Page 10: Assembly Diagram

    ASSEMBLY diAGRAM SKU 66593 For technical questions, please call 1-800-444-3353. Page 10...
  • Page 11: Parts List

    3.27 Cover Wheel Cover Zerk Fitting Washer Screw Bearing Cover Steel Ball Bearing Holder Wheel Fork 4.10 Wheel SKU 66593 For technical questions, please call 1-800-444-3353. pARTS LiST part description 4.11 Rivet Axle Stop Ring Wheel Zerk Fitting Roller Stop Ring...
  • Page 12: Limited 90-Day Warranty

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 66593 For technical questions, please call 1-800-444-3353. Page 12...

Table of Contents