Power Supply; Turning Unit On/Off; Listening To The Radio - Teac PR270 User Manual

Portable am/fm radio
Table of Contents

Advertisement

GB
1.
Dial pointer
2.
FM/AM band selector
3.
Phones jack
4.
TUNING control
5.
Volume control/ unit on/off
6. Speaker
7. Carrying handle
8. FM telescopic antenna
9. AC power cord
10. Battery & AC cord compartment

POWER SUPPLY

AC: 240V ~ 60 Hz
DC: 4x1.5V, battery type R14/ UM-2/"C" size (not provided)
For optimal performance, alkaline batteries are recommended. These batteries must be replaced every
six months.
1. Insert the plug of power cord into a standard wall outlet.
2. Install the batteries in their compartment. Use only the size and type of batteries specified. Respect the
polarity indicated in the compartment. Improper polarity can cause damage to the device. Do not attempt
to recharge the batteries, they can catch fire or explode. The batteries need to be replaced when: The
volume decreases, or sound is distorted during operation.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
Note:
-The AC cord must be unplugged from the power outlet for the unit to run on the batteries.
- When the set is connected to the mains, the power source automatically switches to AC.

TURNING UNIT ON/OFF

1.Rotate the volume knob clockwise to turn on the unit, you will hear a "click" sound.
2.Rotate the volume knob counter-clockwise to turn off the unit, please make sure you hear a "click"
sound.

LISTENING TO THE RADIO

1. Turn on the radio by rotating the volume knob.
2. Use the band selector FM/AM to select band.
3. Use the tuning control to tune to your desired radio station.
4. Adjust the volume level.
To enhance radio reception ability:
FM: Extend the telescopic antenna.
AM: Rotate the unit horizontally for optimum reception.

Advertisement

Table of Contents
loading

Table of Contents