Casio CTK-671 User Manual page 58

SONG MEMORY
Editing Techniques and Display Contents
The following describes the editing techniques you can use
to change the various parameters stored in memory.
To change the key pressure (velocity) of a note
Use the number buttons or [+] and [–] to adjust the key pres-
sure.
N o t e G 4
To change the pitch of a note
Input a new note on the keyboard or use [+] and [–] buttons
to change the pitch of a note. The pitch you specify here is
reflected in the keyboard and the notes shown in the staff on
the display.
N o t e G 4
IMPORTANT!
Whenever editing memory contents, never change a note so
it is identical to the note before or after it. Doing so may alter
the length of the changed note and the note before or after it.
Should this happen, you will have to re-record the entire
track.
To change a chord
Use the chord fingering method selected by the MODE switch
(FINGERED, CASIO CHORD, etc.) to input a chord.
C h o r d
E-56
SONG MEMORY TRACK
[ ]/[ ] CURSOR
YES
[+]/[–]
[ ] ENTER
To change a tone number
Use the number buttons or [+] and [–] buttons to change a
tone number.
G r a n d P n o
NOTE
• In the case of real-time recording, you later can change tone
numbers you specified while recording to Tracks 1 through 6 is
in progress.
• You can only change tone numbers that were originally set for
Tracks 2 through 6 using step recording.
To change a rhythm number
Use the number buttons or [+] and [–] buttons to change a
rhythm number.
P o p
NOTE
• In the case of real-time recording, you later can change rhythm
numbers you specified while recording to Track 1 is in progress.
• You can only change rhythm numbers that were originally set
for Track 1 using step recording.
To change a rhythm controller operation *
* INTRO/ENDING 1 button, INTRO/ENDING 2 button,
VARIATION/FILL IN 1 button, VARIATION/FILL IN 2
button, SYNCRHO/FILL IN NEXT button operations
Press the rhythm controller button you want to change to.
I n t / E n d 1
703A-E-058A