To Save A Setup In Registration Memory; To Recall A Setup From Registration Memory - Casio CTK-671 User Manual

Setup Names
You can assign setups into one of 16 areas, which you can
select using BANK buttons 1 through 4 and the four REGIS-
TRATION buttons. Area names range from 0-1 through 3-4
as shown below.
BANK
1
1
BANK 0 0-1 0-2
BANK 1 1-1 1-2
2-1 2-2
BANK 2
BANK 3 3-1 3-2
1 Use the BANK button to select the bank. Each press of
BANK cycle through the bank numbers from 0 to 3.
2 Pressing one of the REGISTRATION buttons (1 to 4) se-
lects the corresponding area in the currently selected bank.
NOTE
• Whenever you save a setup and assign it a setup name, any
setup data previously assigned to that name is replaced with
the new data.
• You can use the keyboard's MIDI capabilities to save your set-
up data to a computer or other external storage device. See
"Using the Data Download Service" on page E-68 for details.
To Save a Setup in Registration
Memory
1.
Select a tone and rhythm, and otherwise set up
the keyboard the way you want it.
• See "Registration Memory Settings" on page E-44 for
details on what data is stored in the registration mem-
ory.
2.
Use the BANK button to select the bank you
want.
• If you do not perform any operation for about five
seconds after pressing the BANK button, the display
returns to the contents in step 1, above.
• Bank 1 selected.
B a n k
703A-E-047A
STORE
2
2 3 4
0-3 0-4
1-3 1-4
2-3 2-4
3-3 3-4
3.
While holding down the STORE button, press a
REGISTRATION button (1 to 4).
• The following display appears when you press the 2
button.
S t o r e
4.
Release the STORE and REGISTRATION buttons.
NOTE
• The setup is saved as soon as you press a REGISTRATION
button in step 3, above.
To Recall a Setup from Registration
Memory
1.
Use the BANK button to select the bank.
• If you do not perform any operation for about five
seconds after pressing the BANK button, the keyboard
automatically clears the registration memory recall
screen.
B a n k
2.
Press the REGISTRATION button (1 to 4) for the
area whose setup you want to recall.
R e c a l l
• The setup name along with the message "Recall" ap-
pears on the display.
NOTE
• If you press a REGISTRATION button without using the BANK
button to select a bank first, the last bank number selected is
used.
E-45