Setting The Auto Clear Time - Canon 800 Instructions Manual

The function specifies the time after which the scanner
switches to Standby mode when it is left unused.
1
+
2
3

Setting the Auto Clear Time

Hold down the Clear key and the Trimming/Border key
for 2 seconds.
Use the plus (+) and minus (-) keys to select the Auto
Clear time.
Press the Start key to confirm the setting.
NOTE
The available settings for the Auto Clear time are 0,
3, 15, 30, 60, or 90 minutes. Selecting 0 disables the
Auto Clear function. The available settings for the
Auto Clear time are 0, 3, 15, 30, 60, or 90 minutes.
Selecting 0 disables the Auto Clear function. To
cancel Standby mode, press the key again or press
any other key.
– 38 –