Setting The Date And Time - Canon 800 Instructions Manual

Setting the Date and Time

When the date and time are added to the scanned image in
Reader Printer mode, the date and time added are those set
internally on the scanner by this function. This section
describes how to set and check the date and time.
+
1
2
3
4
AE
5
Setting the Date and Time
Hold down the Clear key and the Negative/Positive key
for 2 seconds. The year figure blinks on the display and
you can start setting the date and time.
Check that the lamp at the left end of the brightness
indicator is blinking and then press the plus (+) or
minus (-) key to set the year.
Display
~
~
Press the brightness adjustment key ( ) to display the
month and then use the plus (+) and minus (-) keys to
set the month.
Display
~
Press the brightness adjustment key ( ) to display the
day and then use the plus (+) and minus (-) keys to set
the day.
Display
~
Press the brightness adjustment key ( ) to display the
time (24-hour format) and then use the plus (+) and
minus (-) keys to set the hour.
Display
~
– 36 –
Setting
1951 to 1999
2000 to 2050
Setting
January to December
Setting
1st to 31st
Setting
00 to 23